Dulux Heritage Walls and Ceilings - Boathouse Blue - Velvet Matt Emulsion Paint 2.5L

A velvet matt finish is a luxurious, low-sheen finish that provides a soft, smooth appearance, reminiscent of velvet fabric. It's designed to absorb light, offering a sophisticated look with minimal reflection.

While washable, this paint is generally recommended for living areas, bedrooms, and hallways. For environments with high humidity and condensation, like bathrooms and kitchens, Dulux offers specialized paints (e.g., Easycare Bathroom or Kitchen paint) that provide enhanced protection against moisture.

Typically, a 2.5L tin of emulsion paint will cover approximately 32.5 square meters with one coat. However, actual coverage can vary based on the porosity and texture of the surface being painted. Always refer to the product label for specific coverage guidelines.

For previously painted surfaces in good condition, a primer is often not required. However, for new plaster, bare surfaces, or when painting over very dark, glossy, or heavily stained colours, applying a suitable primer or basecoat is highly recommended for optimal adhesion, coverage, and a smooth finish.

The paint is typically touch dry within 2-4 hours. You can usually apply a second coat after 4-6 hours. These times are estimates and can be affected by room temperature, humidity, and ventilation. Always check the specific instructions on the paint tin.

For minor marks, gently wipe the affected area with a soft, damp cloth and a very mild detergent solution. Avoid harsh scrubbing or abrasive cleaning agents, as these can dull or damage the delicate velvet matt finish.

Ensure the surface is properly prepared and smooth. Use a high-quality brush or roller, apply paint evenly, and avoid overworking the wet paint. Always allow adequate drying time between coats.

Thoroughly stir the paint before and during application to ensure pigments are well mixed. Apply a second coat after the first has completely dried. For significant colour changes or porous surfaces, a primer may be beneficial.

This often indicates insufficient surface preparation. Ensure surfaces are clean, dry, dull, and free from loose or greasy material before painting. Sanding and priming affected areas might be necessary.

Paint colour can be influenced by lighting conditions and surrounding colours. Ensure the paint has been thoroughly stirred. Allow the paint to fully dry, as wet paint can appear darker or lighter. Always test a small, inconspicuous area first.