Dulux Heritage Velvet Matt Emulsion Paint 2.5L - Potters Pink

A 2.5L can typically covers approximately 32.5 square meters with one coat, depending on the porosity and texture of the surface. For two coats, this would be around 16.25 square meters. Always check the specific coverage rate on the paint can for precise details.

Yes, Potters Pink is a gentle, pale, and ultra-feminine shade that can create a beautiful, calming, and airy atmosphere, making it a lovely choice for a child's bedroom, nursery, or playroom.

Dulux Heritage Velvet Matt is primarily designed for interior walls and ceilings in living areas. For high-humidity areas like bathrooms and kitchens, we recommend using a specific 'Kitchen & Bathroom' paint that offers enhanced durability and moisture resistance.

As this is a water-based paint, clean your brushes and rollers immediately after use with warm soapy water. Rinse thoroughly until the water runs clear and allow them to dry.

While not always strictly necessary for previously painted surfaces in good condition, applying a suitable primer is highly recommended for bare, porous, or newly plastered surfaces to ensure optimal adhesion, coverage, and a consistent finish. A primer is also advisable for significant colour changes.

A 'Velvet Matt' finish is a low-sheen, non-reflective finish that provides a soft, sophisticated look. It helps to hide minor imperfections on walls and offers excellent depth of colour, creating a luxurious feel in any room.

Ensure the surface was properly prepared (cleaned, sanded, primed). Apply an additional, even coat after adequate drying time. Ensure consistent paint thickness and roller pressure.

Paint colours can look different in various lighting conditions. Always test a small area before committing to the entire room. Allow paint to fully dry as wet paint often appears darker.

This usually indicates poor surface preparation. Ensure surfaces are clean, dry, and free from loose material before painting. Scrape off loose paint, sand smooth, prime, and reapply.

This can be caused by applying paint too thickly, painting in high humidity, or painting over a hot surface. Ensure thin, even coats and good ventilation.