Crown Crafted Luxurious Flat Matt Paint - Clean Slate - Grey

This paint is suitable for interior walls and interior wood surfaces, such as skirting boards, architraves, and doors.

A primer is recommended for bare wood, new plaster, or significantly porous surfaces to ensure optimal adhesion and finish. For previously painted, sound surfaces, priming may not be necessary if the surface is clean and prepared properly.

Drying time typically takes around 4 hours between coats, but this can vary depending on temperature and humidity. Always refer to the product label for specific drying and recoat times.

Clean all painting equipment immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is removed.

While it can be used, for high-humidity areas like bathrooms and kitchens, paints specifically designed for those environments (e.g., with added moisture resistance) might offer better long-term durability. This paint is a luxurious flat matt finish designed for general interior use.

Clean Slate Grey is designed as a neutral grey, offering a sophisticated and versatile base that can complement both warm and cool palettes, creating a calm and understated atmosphere.

The Breatheasy® formula means the paint is 99% solvent-free and designed to minimize airborne paint odors, making it a healthier and more comfortable choice for your home environment during and after painting.

Ensure the surface was thoroughly prepared, clean, and dry. Apply an additional thin, even coat, ensuring consistent application technique and sufficient drying time between coats. Use a primer on very porous or contrasting surfaces.

This often indicates poor surface preparation. Ensure the surface is clean, dull (sanded if glossy), and free of any contaminants like grease or dirt before painting. Consider using a suitable primer for better adhesion.

Apply thinner coats and ensure you are not overloading your brush or roller. Maintain a 'wet edge' when rolling to avoid lines. Use a high-quality brush or roller appropriate for matt emulsion paints. Allow paint to flow and level naturally.

Paint color can vary slightly based on lighting conditions, underlying surface color, and number of coats. Ensure adequate lighting when viewing the painted surface. Allow the paint to fully dry and cure, as color often deepens or changes slightly during this process. Test a small, inconspicuous area first.