Crown Crafted Flat Matt Paint 2.5L - Green

The 2.5L can generally covers a medium-sized room with two coats, but actual coverage depends on the surface's porosity and texture. It's always best to measure your walls (height x width) and account for windows/doors, then refer to the product's estimated coverage per litre on the can.

For optimal color depth and an even finish, we generally recommend applying two coats of Crown Crafted Flat Matt Paint. On some surfaces or when painting over a very dark color, a third coat might be beneficial.

This paint is designed for interior walls, ceilings, and wood, and has a flat matt finish. While suitable for general living areas, for high-humidity environments like bathrooms and kitchens, or high-traffic areas, a paint specifically formulated for moisture resistance and enhanced durability might be a better choice.

Crown Crafted Flat Matt Paint is typically touch dry within a few hours. However, always allow sufficient time before applying a second coat. Refer to the specific recoat time on the product label for best results. Full cure can take several days.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is removed, then reshape bristles and allow to air dry.

Yes, the 'breath-easy' formula is designed to minimize allergy triggers, making it a suitable choice for children's rooms where a healthy indoor environment is a priority. However, for highly active children's rooms, consider that flat matt finishes can be harder to clean than more durable, washable finishes.

Store any leftover paint in its original container with the lid tightly sealed. Keep it in a cool, dry place, away from direct sunlight, extreme temperatures, and frost. Properly stored, the paint can remain usable for an extended period.

This often occurs due to applying too much paint, inconsistent brush/roller pressure, or not allowing sufficient drying time between coats. Ensure thin, even coats and use a good quality roller or brush. Allow each coat to dry completely before applying the next.

Poor adhesion is usually a sign of inadequate surface preparation. Ensure surfaces are thoroughly cleaned, sanded (if previously painted gloss), and primed where necessary. Remove any loose or flaky existing paint before application.

This can be caused by applying paint to a surface that is too warm, applying thick coats, or painting over a damp surface. Ensure the room temperature is moderate, apply thin coats, and always paint on a dry, prepared surface. Ensure sufficient ventilation.

Paint color can be influenced by lighting conditions, the color of the underlying surface, and the number of coats applied. Always apply at least two coats for true color representation. Check the lighting in the room at different times of the day.