Ronseal Ultimate Protection Decking Stain - Stone Grey - 2.5 litre

This decking stain is designed to last twice as long as a standard decking stain, offering extended protection and appearance.

Clean the deck thoroughly to remove dirt, algae, and grease. Ensure it is completely dry, usually 24-48 hours after cleaning, before applying the stain.

It is best to remove all existing paint or stain for optimal adhesion and performance. If unsure, test on a small, inconspicuous area first.

Two coats are generally recommended for best results, providing maximum protection and a uniform colour. Always follow the product's specific instructions.

Spring and autumn are typically the best times, offering moderate temperatures and lower humidity. Avoid applying in direct, hot sun or when rain is forecast.

No, this product includes added slip resistance to make the deck surface safer, especially when wet.

Regular cleaning with water and a mild detergent is sufficient. Avoid using harsh abrasive cleaners that can damage the stain's finish.

Ensure the stain was applied evenly and that previous treatments were removed. Stir the stain thoroughly before and during application. Apply a second coat if necessary.

The surface may not have been properly prepared. Ensure the deck was clean, dry, and free of contaminants before application. Remove any peeling stain and reapply after thorough preparation.

This is unexpected if the correct product was used and applied properly. Ensure the product is fully dry. If the issue persists, consider a specific anti-slip additive product compatible with stains.

Colours can vary based on wood type and the number of coats applied. Test the stain on an inconspicuous area first. If the colour is not as desired after the first coat, a second coat may alter it. Ensure you are using the correct colour variant.