Ronseal Ultimate Protection Decking Paint - Willow 2.5L

A 2.5L tin covers approximately 10m² on ridged boards and 12m² on smooth, planed boards.

Allow 4 hours of drying time between coats and 48 hours for full cure.

No, the decking surface must be completely dry before application for the paint to adhere properly.

No, priming is usually not required. However, ensure the surface is clean and prepared according to the instructions.

Protect the decking from rain for at least 4 hours after each coat to ensure proper drying and adhesion.

Clean the decking with mild soapy water. Avoid using harsh chemicals or abrasive cleaners.

Always check the product label for specific shelf-life information. Store the paint in a cool, dry place away from direct sunlight.

Ensure the surface is properly prepared (cleaned, sanded) before application. Apply a thin, even coat.

Stir the paint thoroughly before and during application. Apply an even coat to ensure consistent colour.

Make sure you have removed all old flaking coating. Consider applying a second coat or sanding the decking lightly before the first coat.