Ronseal Ultimate Protection Decking Paint - Black

This product is specifically designed for decking. For garden fences, please refer to Ronseal's range of fence paints, as they have different formulations suited for vertical surfaces.

A minimum of two coats is recommended for optimal protection and finish. Heavily weathered or porous wood may benefit from a third coat.

Allow at least 4 hours between coats. The surface will be dry to the touch sooner, but full cure and resistance to foot traffic typically takes 24-48 hours.

While sanding is not always mandatory if the wood is clean and bare, it can help improve adhesion and achieve a smoother finish, especially on older or uneven surfaces. Always ensure the deck is free of dust after sanding.

It is best to remove any existing coatings completely before applying. If you choose to apply over an existing finish, ensure it is sound, well-adhered, and thoroughly cleaned. Test in an inconspicuous area first.

No, this product is formulated for natural wood decking only. It is not suitable for composite materials.

The 'Ultimate Protection' designation suggests long-lasting durability. However, the exact lifespan can vary based on weather exposure, foot traffic, and maintenance. Reapplication may be needed every few years.

Ensure the decking was thoroughly cleaned, dry, and free from contaminants like grease or mold before application. Old finishes or sealants may need to be fully removed.

Apply paint evenly, ensuring no thin spots. Apply a second coat if necessary, maintaining a wet edge to avoid lap marks. Ensure adequate paint is loaded onto the brush or roller.

For deeper cracks, a dedicated wood filler may be required before applying the paint. This product is designed to fill *small* cracks.

This can be due to inadequate preparation or application in poor weather conditions. Ensure the surface was properly prepped and the paint was applied according to instructions, avoiding damp or freezing conditions.