Ronseal Ultimate Protection Decking Stain - Sage - 2.5 litre

This stain is designed to last twice as long as standard decking stains, offering extended protection and aesthetic appeal.

It is best to remove old, flaking finishes completely before applying. For best results, apply to bare, prepared wood or over a compatible Ronseal primer/preserver.

Drying times can vary depending on temperature and humidity. Always refer to the product packaging for specific drying times between coats and before allowing foot traffic.

Two thin coats are generally recommended for optimal protection and a uniform finish. Ensure the first coat is dry before applying the second.

Yes, it is suitable for all types of wooden decking, including hardwoods and softwoods.

Yes, this product includes added slip resistance to help make your deck safer, especially when wet.

This range is available in several colours, including Sage, Charcoal, Rich Mahogany, Willow, Cedar, Medium Oak, and Slate. The specific colour of this product is Sage.

Ensure the stain was thoroughly stirred before and during application. Apply in thin, even coats and avoid over-brushing. Ensure consistent application technique across the entire deck.

Check application conditions. Ensure the temperature is within the recommended range (typically above 10°C) and humidity is not excessively high. Avoid applying too thickly, as this can impede drying.

The surface may not have been adequately prepared. Ensure the deck was clean, dry, and free from contaminants before application. Previous coatings might not have been fully removed or compatible. Sanding the surface before application can improve adhesion.

Colour can vary depending on the type and condition of the wood, as well as the number of coats applied. Test the stain on an inconspicuous area first. Ensure consistency in application and ensure no other stains or finishes are present on the wood.