Ronseal Diamond Hard Garage Floor Paint - Slate

This paint is specifically designed for use on stone and concrete garage floors.

Coverage is up to 12 m² per litre. Coverage may vary depending on surface porosity and application method.

The paint dries in 4 hours.

Two coats are recommended for optimal protection and appearance.

Clean spills immediately with a damp cloth. Regular cleaning with a mild detergent and water will help maintain the finish.

It's generally not required, but ensure the surface is clean and free of debris. Priming can be considered for very porous or damaged concrete.

It has a satin finish.

Ensure the surface is properly prepared by cleaning, degreasing, and sanding if needed. Allow sufficient drying time between coats.

Make sure the surface is completely dry before painting and that all loose paint or debris is removed. Apply an appropriate primer if required.

Apply the paint evenly, avoiding excessive thickness. Use a good quality roller or brush and ensure adequate lighting.