Blackfriar Anti-Slip Floor Paint - Grey

You can use it on concrete, cement, wood, metal, and stone surfaces.

You can apply it using a brush or roller. Two coats are recommended for optimal results.

It takes about 4-6 hours to hard dry at 20°C. Recoating can be done after 16 hours.

The coverage rate is 6-10m²/L per coat.

Yes, it is suitable for both indoor and outdoor use.

Ensure the surface is properly prepared, clean, and primed if necessary. Lightly sand glossy surfaces to improve adhesion.

Yes, it is ideal for garage floors, providing a durable and easy-to-clean surface.

Yes, it resists grease, oil, and weak solutions of acid and alkali.

Ensure the surface is properly prepared, clean, and primed if necessary. Lightly sand glossy surfaces to improve adhesion.

Check the temperature and humidity levels. Ensure adequate ventilation. Avoid applying thick coats.

Ensure paint was mixed thoroughly before application to distribute the anti-slip aggregates. Apply a second coat if necessary, following the recommended drying times.

Apply a second coat to increase durability. Consider applying a clear topcoat for added protection.