Johnstone's Trade Eggshell Paint - Black

It provides a mid-sheen finish, which is less glossy than silk but more durable and cleanable than matt. It has a subtle sheen resembling an eggshell surface.

No, this paint is not recommended for kitchens or bathrooms. It is best suited for general interior walls, wood, and metal where moisture levels are lower.

Two coats are recommended for the best results, ensuring full coverage and durability.

On average, each litre of Johnstone's Trade Eggshell Black paint covers 18-20 square meters.

You can apply the second coat within 4-6 hours of applying the first coat.

It is suitable for interior walls, wood, and metal surfaces.

Clean spills immediately with a damp cloth. For routine cleaning, use a mild detergent and a soft cloth. Avoid abrasive cleaners.

Ensure paint is well-stirred before application. Apply thin, even coats using a good quality brush or roller. Avoid overworking the paint. Allow adequate drying time between coats.

Check that the surface was properly prepared (clean, dry, free from grease). Lightly sand glossy surfaces. Ensure a suitable primer was used on bare or problematic surfaces.

Ensure sufficient coats have been applied, as one coat may not provide full opacity. Check the lighting conditions in the room, as this can affect colour perception. Ensure no underlying colours are showing through.

Stir the paint thoroughly. If still too thick, a very small amount of clean water may be added, but follow manufacturer guidelines to avoid compromising the finish. Over-thinning can lead to poor coverage and durability.