Johnstone's Trade Professional Gloss - Black

It is suitable for interior and exterior wood and metal surfaces.

The surface should be clean, dry, and free from dust and grease. Lightly sand previously painted surfaces. Use Johnstone's Trade Professional Undercoat on bare surfaces or for significant color changes.

The coverage rate is approximately 17 m² per litre.

While primarily designed for wood and metal, it can be used on walls if they are properly prepared and primed, especially for specific decorative effects. However, its high-gloss finish is typically preferred for trim and features.

Clean all tools immediately after use with a suitable solvent, such as white spirit.

As a solvent-based paint, it has a characteristic odor during application and drying. Ensure adequate ventilation during use.

Yes, its durable and heat-resistant properties make it suitable for painting metal radiators.

Ensure the surface is properly prepared and primed. Stir the paint thoroughly and apply in thin, even coats. Check for excessive thinning or over-application.

Apply with a good quality brush or roller and use smooth, consistent strokes. Avoid overloading the applicator. Allow adequate drying time between coats and consider a lighter sanding between coats if necessary.

Ensure application is within the recommended temperature and humidity range. Avoid applying too thickly. Curing times can vary based on environmental conditions.

This product is formulated to resist yellowing. If yellowing occurs, it may be due to extreme conditions or application over an incompatible surface or primer. Ensure correct primer/undercoat is used.