Setup, Compatibility & Care
- Surface Preparation: Ensure surfaces are clean, dry, and free from loose paint, rust, or grease. Sand the surface lightly to create a key for the paint.
- Priming: Use Johnstone’s Aqua Water Based Undercoat for the best finish and adhesion, especially on bare wood or metal.
- Application: Stir the paint thoroughly before use. Apply with a brush, roller, or spray gun. Apply thin, even coats.
- Drying Time: Allow the paint to dry completely between coats (typically 4-6 hours, but check the product label).
- Cleaning: Clean brushes and equipment with water immediately after use.
*Compatibility:* This paint is specifically designed to work with Johnstone’s Aqua Water Based Undercoat. Avoid mixing with other types of paint or solvents.
*Care:* Store the paint in a cool, dry place. Ensure the container is tightly sealed when not in use. Avoid extreme temperatures.