Johnstone's Trade Covaplus Matt Paint - White

This paint is suitable for interior walls and ceilings, particularly those made of plaster. Ensure the surface is clean, dry, and properly prepared before application.

For best results, apply two coats of paint. Allow the first coat to dry completely before applying the second coat.

It is generally not necessary to prime previously coated surfaces. For new plaster, follow the manufacturer's recommended dilution guidelines for the first coat.

Clean brushes and rollers immediately after use with water. Avoid letting the paint dry on your tools.

Coverage can vary depending on the surface and application method. Typically, you can expect around 12-14 square meters per liter.

While suitable for interior use, it is a matt finish and might not be ideal for areas with high moisture. Consider a paint specifically designed for bathrooms.

Allow approximately 2-4 hours drying time between coats under normal conditions. Drying times may vary depending on environmental conditions.

Ensure thorough stirring of the paint before application. Apply a second coat if necessary, allowing sufficient drying time between coats.

Ensure you are not applying it too thickly. If necessary, dilute the paint with a small amount of water, following the manufacturer's guidelines.

Ensure the surface is properly prepared, clean, and free from loose paint. If necessary, sand the surface and apply a primer before painting.