Johnstone's Trade Stormshield Smooth Masonry - Black

Johnstone's Trade Stormshield Smooth Masonry provides up to 15 years of protection, depending on environmental factors and surface preparation.

The paint can be applied between 2°C and 35°C. Avoid application in extremely cold or hot conditions.

For best results, apply two coats, allowing 2-4 hours of drying time between coats.

It is suitable for cement rendering, roughcast, brick, and concrete surfaces.

If the surface is highly porous or friable, apply a coat of stabilizing solution first. Otherwise, the paint can be applied directly.

The paint is rain resistant after just 20 minutes of application.

Clean with mild soap and water to remove dirt or stains. Avoid abrasive cleaners or tools.

The paint offers coverage of up to 17m2 per litre.

Ensure the surface is clean and free of contaminants. Apply a stabilizing solution to highly porous surfaces. Check the application temperature and weather conditions.

Ensure the paint is fully cured. If fading persists, it might indicate prolonged sun exposure or surface damage; consider reapplying a fresh coat.

Apply an even coat using the recommended application method. Ensure proper surface preparation and apply two coats as directed.

Check the temperature and humidity levels; ensure the application is within the recommended range (2°C to 35°C). Ensure adequate ventilation.