Crown Crafted Flat Matt Paint 2.5L - Button Box - Blue

This Crown Crafted Flat Matt Paint is suitable for interior walls, ceilings, and wooden surfaces.

Typically, the paint is touch dry in 2-4 hours. Always refer to the specific drying times on the product label for precise instructions, and allow sufficient time before applying a second coat.

While it can be used, flat matt finishes are generally less resistant to moisture and frequent cleaning than silk or satin finishes. For high-moisture areas, consider a paint specifically formulated for kitchens and bathrooms.

For best results, especially on new, bare, or significantly discolored surfaces, a suitable primer is recommended. It can improve adhesion, coverage, and the final finish.

Clean all equipment thoroughly with warm soapy water immediately after use. Rinse until water runs clear.

Ensure the surface was properly prepared (clean, dry, smooth). Apply paint evenly without overspreading. Allow sufficient drying time between coats and apply a second coat if needed.

Thoroughly stir the paint before and during use. Ensure the previous surface color is not too dark; a primer or additional coats may be required. Check lighting conditions, as paint color can appear different under various lights.

This often indicates poor surface preparation. Ensure the surface is clean, dry, and free from loose paint or grease. Sand glossy surfaces to provide a key, and use a suitable primer if necessary.

Avoid applying paint too thickly or in very humid conditions. Ensure the surface is completely dry and free of moisture before painting. Use a good quality roller/brush and avoid excessive rolling/brushing.