Crown Crafted Flat Matt Paint 2.5L - Blue

This paint is designed for interior walls, ceilings, and wooden surfaces. While technically possible, for high-humidity areas like bathrooms, a paint specifically formulated for moisture resistance (e.g., a kitchen and bathroom paint) is generally recommended for long-term durability and mold prevention.

Coverage varies based on surface porosity and application method. Typically, 2.5L of paint can cover approximately 25-30 square meters with one coat. Always refer to the product label for precise coverage rates, and plan for two coats for the best finish.

For most previously painted, sound surfaces, a primer may not be strictly necessary. However, for bare wood, new plaster, or if painting over a very dark or glossy colour, using an appropriate primer is highly recommended to ensure better adhesion, truer colour, and a more durable finish.

Surface dry time is typically 2-4 hours, and it's usually ready for a second coat after 4-6 hours. Full cure time, when the paint reaches its maximum hardness and durability, can take several days to a few weeks. Always check the product label for specific drying and recoating times.

Flat matt finishes, while elegant, are generally less washable and durable than paints with a sheen (like silk or satin). For light marks, gentle wiping with a damp, soft cloth may work, but excessive scrubbing is not recommended as it can burnish the finish.

No, this Crown Crafted Flat Matt Paint is specifically formulated for interior use on walls, ceilings, and wooden surfaces. It is not designed to withstand outdoor weather conditions.

Ensure the surface was properly prepared (clean, dry, primed if needed) and that you applied an even coat. Allow sufficient drying time between coats and apply a second coat if necessary.

This often happens when too much paint is loaded onto the brush or roller, or if the paint is too thin. Use less paint per load and apply in thinner, even layers. If thinning, follow manufacturer guidelines carefully.

While the paint has a 'breath-easy' formula, some minimal odor may still be present. Ensure good ventilation by opening windows and doors during and after painting. The odor should dissipate within a few days.

Proper surface preparation is crucial. The surface must be clean, dry, and free of grease or loose material. For glossy or very smooth surfaces, a light sanding and a suitable primer are often required before painting.

Flat matt paints often require two coats for full, opaque colour, especially if painting over a dark or contrasting base. Always allow the first coat to dry completely before applying the second.