Surface Preparation: Achieving the best results starts with proper surface preparation. Ensure all surfaces are clean, dry, and smooth. Remove any loose paint, dirt, or grease. For new plaster, porous surfaces, or when painting over a significantly darker colour, a suitable primer is recommended. Lightly sand glossy surfaces to create a key for better adhesion. Application: Before use, stir the paint thoroughly to ensure an even consistency and colour. Apply using a good quality brush or roller. Work in even strokes, avoiding overloading your brush or roller to prevent drips and ensure a smooth finish. Typically, two coats are recommended for optimal colour depth and durability. Allow adequate drying time between coats (Info needed: refer to product label for specific drying and recoat times). Compatibility: This paint is formulated for interior use on walls, ceilings, and wooden surfaces. Do not use it for exterior projects or on floors. Care and Maintenance: Once dry, the painted surface can generally be wiped clean with a soft, damp cloth if necessary. Avoid harsh scrubbing or abrasive cleaners, as these can damage the flat matt finish. Storage: Store any unused paint in its original container, tightly sealed, in a cool, dry place, away from direct sunlight and frost. Ensure the lid is securely replaced to prevent the paint from drying out. Disposal: Dispose of unused paint and cleaning materials responsibly, following local regulations.