Evo-Stik Frame Silicone Sealant - White - 290ml

The product description does not explicitly state it is paintable. Silicone sealants can sometimes cause adhesion issues with paint. It is recommended to test compatibility with your chosen paint on a small area or use a suitable primer if painting is required.

While not specified in the product details, unopened silicone sealant cartridges typically have a shelf life of 12-18 months when stored in cool, dry conditions away from direct sunlight.

The curing time varies depending on temperature and humidity. Generally, it skins over in about 20-30 minutes and becomes tack-free within a few hours. Full cure can take 24-48 hours or longer in cool, damp conditions.

This sealant is designed for frame sealing and general construction joints. While it is waterproof, specific sanitary or anti-mould silicones are generally recommended for shower areas due to constant high moisture and potential for mould growth.

This is a frame sealant, specifically formulated for high movement joints around frames and buildings. Evo-Stik offers other sealants like sanitary, general-purpose, and weather sealants, each tailored for different applications and environments.

As a low modulus silicone, it is designed to accommodate high joint movement, though the exact percentage is not specified in the provided description. This flexibility is key for its performance around frames that experience expansion and contraction.

Ensure the cartridge's inner seal is punctured and the sealant gun is functioning correctly. Check that the nozzle is cut appropriately.

Verify that the surface is clean, dry, and free from dust, grease, or old sealant. Ensure the surface is compatible (refer to compatibility list) and that no primer was inadvertently skipped if the surface requires it (though this product is designed for primerless application on most common substrates).

Smooth the bead within the first 10-15 minutes using a wet finger, spatula, or smoothing tool. Practice applying an even bead before full application.

Ensure application occurred within the recommended temperature range and humidity levels. Some silicones can take longer to fully cure in cool or damp conditions. Ensure adequate ventilation.