Evo-Stik Glaziers Putty - C20 - Natural

It is designed for face glazing timber and steel door and window frames, providing a durable seal around the glass.

It is an acrylic formulation that offers superior durability and adhesion compared to traditional oil-based options.

Yes, the putty is over-paintable, allowing you to match it to surrounding décor once it has fully cured.

The Evo-Stik Glaziers Putty has a shelf life of 2 years from the date of manufacture when stored correctly.

This product is available in a C20 cartridge size.

While designed for face glazing on timber and steel frames, its application is generally for exterior use or where face glazing is required. Always ensure it is suitable for your specific application.

Ensure the frame is clean, dry, and free from any loose material, dust, or grease for optimal adhesion.

Ensure the cartridge nozzle is cut correctly for the desired bead size. If the putty is stiff, it may be due to cold temperatures; warm the cartridge slightly (do not overheat) before application.

Ensure the frame surface (wood or steel) is clean, dry, and free from dust, grease, or old putty. For porous surfaces like bare timber, a primer might enhance adhesion, though this product is formulated for direct application.

Allow the putty to cure fully according to the manufacturer's recommendations before painting. Ensure the chosen paint is compatible and applied correctly. A primer may be beneficial for achieving a uniform finish.

This can indicate insufficient putty was applied or it was applied too thinly. Ensure a consistent, adequate bead is applied to fill the gap effectively. Avoid overworking the putty.