Evo-Stik Lead & Gutter Silicone Sealant - Grey

Evo-Stik Lead & Gutter Silicone Sealant is a low modulus, neutral cure sealant, suitable for high ...

Best current price£8.46from Bradfords

One Offer

1 offer from £8.46

View price history by clicking the chart icon.

BradfordsEvo-Stik - Lead & Gutter Sealant - Grey - C20 Cartridge
£25.00 delivery
£8.46
Visit shop

Product Information

Full details

This guide is for anyone using Evo-Stik Lead & Gutter Silicone Sealant - Grey. It's ideal for sealing and pointing lead flashing, joints in gutters and downpipes, and overlaps in rigid sheet roofing, providing a tough, flexible, and waterproof seal. Note that while it bonds to most materials, always ensure surfaces are clean for optimal adhesion.

All features

ColourGrey
Model Part NumberC20
BrandEvo-Stik

Extended Product Information

FAQs

What materials can I use this sealant on?

This sealant is suitable for lead, anodised and mill finish metals, painted steel, cast iron, brick, tile, slate, timber, and most plastics including uPVC.

Do I need to use a primer?

No, this sealant bonds to most building materials without the need for a primer.

How long does it take for the sealant to cure?

Curing time is typically 24-48 hours, but can vary depending on temperature and humidity.

Can this sealant be painted?

The product information does not specify if it is paintable.

Is this sealant suitable for outdoor use?

Yes, it is designed for high movement joints exposed to extreme weather.

How should I store the sealant?

Store in a cool, dry place away from direct sunlight.

How do I clean the sealant?

Clean the sealant with a damp cloth.

Troubleshooting

Sealant not adhering properly.

Ensure surfaces are clean, dry, and free of contaminants. Roughening the surface with sandpaper can also improve adhesion.

Sealant takes too long to cure.

Ensure adequate ventilation and avoid applying in excessively cold or humid conditions. The curing time can be affected by temperature and humidity.

Sealant shrinking or cracking.

Ensure the sealant is applied correctly and is compatible with the materials. Excessive movement in the joint can also cause cracking; consider a sealant specifically designed for high movement joints.

Sealant discolored after application.

Ensure that the sealant is protected from direct sunlight, or extreme weather conditions during the curing phase.

Pros and Cons

Pros

  • Excellent for sealing and pointing lead flashing.
  • Bonds effectively to various materials without a primer.
  • Highly waterproof, ensuring long-term protection.
  • Withstands extreme weather conditions.
  • Flexible, accommodating movement in joints.

Cons

  • Specific to lead and gutter applications; not a general-purpose sealant.
  • Requires proper surface preparation for optimal adhesion.
  • Color limited to grey.

Setup, Compatibility & Care

Setup

  1. Surface Preparation: Ensure surfaces are clean, dry, and free of loose materials, dust, and grease. Use a wire brush or scraper to remove any existing sealant or debris.
  2. Application: Cut the nozzle to the desired bead size and apply the sealant using a caulking gun. Apply a smooth, even bead to the joint or area to be sealed.
  3. Tooling: Tool the sealant with a wet finger or a suitable tool to ensure a proper seal.
  4. Curing: Allow the sealant to cure completely according to the manufacturer's instructions, typically 24-48 hours depending on conditions.

Compatibility

Evo-Stik Lead & Gutter Silicone Sealant is compatible with:

  • Lead
  • Anodised and mill finish metals
  • Painted steel
  • Cast iron
  • Brick
  • Tile
  • Slate
  • Timber
  • Most plastics including uPVC

Care

  • Cleaning: Clean the sealant with a damp cloth.
  • Storage: Store in a cool, dry place away from direct sunlight.
  • Inspection: Regularly inspect sealed areas for any signs of damage or deterioration, and reapply sealant as needed.

Similar items

Price History

DatePrice
Visit shop