Hammerite - Smooth Direct To Rust - 750Ml - Blue

No, Hammerite Direct To Rust Smooth paint is specifically designed to be applied directly onto rust, eliminating the need for a separate primer or undercoat.

It is suitable for ferrous and non-ferrous metals, and can also be used on certain plastics and wood. Always test adhesion on a small area first for non-metal surfaces.

The paint dries to the touch in approximately 2 hours. It is recoatable after 4 hours.

The approximate coverage is 5 square metres per litre.

Clean brushes and equipment immediately after use with white spirit.

It provides a smooth, gloss finish.

The paint offers up to 8 years of durability and protection against corrosion.

Ensure the surface was properly cleaned and free of grease, dust, or loose rust. For non-standard surfaces like plastics or aluminium, an adhesion promoter or appropriate primer may be necessary.

Stir the paint thoroughly before and during application. Apply thin, even coats using a good quality brush or roller. Avoid overworking the paint; apply in consistent strokes.

Ensure application is within the recommended temperature and humidity range. Cold or damp conditions can significantly slow drying times. Avoid applying too thickly.

Ensure all loose rust was removed before application and that adequate coats of paint were applied. For heavily rusted areas, a third coat might be beneficial.