Hammerite - Smooth Direct To Rust - 750Ml - Desert Sand
Best current price£25.46from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£25.46Visit shop B&Q - HammeriteSmooth Direct To Rust750MlDesert Sand
Visit shopB&Q£25.46Visit shop One Offer
1 offer from £25.46
View price history by clicking the chart icon.
Product Information
Full details
This Hammerite Smooth Direct To Rust paint in Desert Sand is ideal for homeowners looking to protect and decorate ferrous and non-ferrous metal surfaces, including doors, garden furniture, and gates. Its key benefit is the ability to be applied directly onto rust, eliminating the need for primers or undercoats, saving time and effort. A potential caveat is its specific coverage rate, requiring careful calculation for larger projects.
All features
| Colour | Beige |
|---|---|
| Model Part Number | mixDesertSand |
| Brand | Hammerite |
Extended Product Information
FAQs
Can I use this paint on galvanized metal?
Yes, it can be used on galvanized metal, but it's recommended to etch the surface or apply a metal primer first for optimal adhesion. Ensure the surface is clean and dry.
Do I need to use a primer?
No, Hammerite Smooth Direct To Rust is specifically designed to be applied directly onto rust without the need for a primer or undercoat.
What is the coverage rate?
The coverage rate is approximately 5 square meters per litre.
How long does it take to dry?
It dries to the touch in 2 hours and can be repainted after 4 hours.
What colours are available?
This product is available in a range of colours, including Desert Sand, Grey, Brown, and Green, among others.
Is this paint suitable for interior use?
While formulated for exterior use, it can be used indoors on metal surfaces. Ensure good ventilation during application and drying.
How should I clean my brushes or rollers after use?
Clean application tools immediately after use with water.
Troubleshooting
Paint not adhering well
Ensure the metal surface was properly prepared, free from grease, oil, and loose rust. Reapply after thorough cleaning.
Uneven finish
Ensure paint was stirred thoroughly before application. Apply in even strokes, avoiding overworking the paint. Ensure consistent application thickness.
Drying time seems longer than stated
Drying times can be affected by temperature and humidity. Ensure application is within recommended environmental conditions. Allow extra time if conditions are cold or damp.
Paint appears too thick
Ensure the paint was stirred well. If extremely cold, allow the paint to reach room temperature. Do not thin the paint unless absolutely necessary and following manufacturer guidelines for specific thinners.
Pros and Cons
Pros
- Eliminates the need for primers and undercoats.
- Protects directly against rust and corrosion.
- Provides a durable and long-lasting smooth gloss finish.
- Suitable for a variety of metal objects.
- Fast drying time speeds up the painting process.
Cons
- Specific coverage rate (5 sq m per litre) requires accurate estimation.
- Best suited for metal surfaces; may require different preparation for other materials.
- Application directly onto heavy rust may require some surface cleaning for optimal adhesion.
Setup, Compatibility & Care
Preparation: For best results, remove any loose rust, scale, and old paint. Ensure the surface is clean, dry, and free from contaminants like grease or oil. Some light wire brushing or sanding might be beneficial on heavily rusted areas.
Application: Can be applied by brush or roller. Stir the paint thoroughly before use. Apply a generous, even coat. Primer or undercoat is not necessary.
Compatibility: Suitable for ferrous (iron, steel) and non-ferrous metals. Can also be used on certain plastics and wood, but testing on a small, inconspicuous area is recommended first.
Care: Clean application tools immediately after use with water. Store the paint in a cool, dry place away from direct sunlight. Ensure the lid is tightly sealed to maintain product integrity.