Dulux Weathershield Smooth Masonry Paint - White - 5L

This paint is designed for exterior masonry surfaces including brick, concrete, pebble-dash, and render.

For optimal coverage, protection, and finish, two coats are recommended.

You should allow a minimum of 4 hours drying time before applying a second coat.

The paint forms a protective barrier against rain in just 30 minutes after application.

A 5L can will cover up to 15 square meters on average, depending on the surface porosity.

Yes, it is water-based and formulated with minimal VOCs (Volatile Organic Compounds), making it a safer choice.

The Weathershield Promise guarantees against peeling, flaking, or mould growth within the paint film for up to 15 years, provided you register the product and apply it within 6 months of purchase. Terms and conditions apply.

Ensure the surface was thoroughly cleaned and free of loose material, dirt, grease, and mould prior to painting. Any powdery or unstable surfaces should be primed correctly before applying the masonry paint. Allow adequate drying time between coats.

Apply the paint evenly, avoiding overloading the brush or roller. Maintain a wet edge during application. Ensure consistent application pressure and that two full coats are applied with sufficient drying time in between.

While the paint is mould and algae resistant, severe existing growth must be completely removed and treated with a fungicidal wash prior to painting. Ensure the surface is fully dry before application. For persistent issues, re-clean and reapply if necessary, ensuring good ventilation and drainage around the painted area.

This can happen on highly porous or uneven surfaces. Ensure the surface was properly prepared and, if very porous, consider a thinned first coat or appropriate primer. Apply coats generously but not excessively thick, allowing full drying time.

High humidity, low temperatures, or poor air circulation can extend drying times. Ensure application conditions are within the recommended temperature range (Info needed: [check product label for specific temperature range]) and that there is adequate airflow.