Dulux Weathershield Masonry Paint - Magnolia

Dulux Weathershield Masonry Paint is suitable for exterior brick, concrete, pebble-dash, and render surfaces.

The paint is touch dry relatively quickly, allowing for recoating in approximately 4 hours, depending on temperature and humidity.

Yes, this masonry paint is formulated to be resistant to mould growth, as well as ultraviolet light and water.

For bare, very porous, or powdery surfaces, it is recommended to use a suitable masonry primer or stabiliser to ensure optimal adhesion and finish. Always check the specific product instructions.

Being water-based, brushes and rollers can be easily cleaned immediately after use with warm, soapy water.

Yes, this paint is water-based and has minimal VOCs (Volatile Organic Compounds), making it a safer choice for you and the environment.

Ensure the surface was thoroughly cleaned and dry before application. Remove any loose or flaking paint, clean again, and consider using a suitable masonry primer/stabiliser before reapplying.

Apply paint in thin, even coats. Use a high-quality brush or roller designed for masonry. Avoid overworking the paint once applied. Ensure the surface is smooth before painting.

Thoroughly clean the surface with a fungicidal wash to kill any existing spores before painting. Ensure proper ventilation and address any underlying moisture issues on the wall.

Porous surfaces may absorb more paint; a primer can help. Ensure you are applying even coats and not too thinly. The provided 250ml pot is a tester size, so actual coverage for large areas will require larger cans.