Dulux Professional Liquid Gloss - White - 750ml

This paint is suitable for interior and exterior wood and metal surfaces, including doors, door frames, skirting boards, and window frames.

Typically, one coat of Dulux Professional Undercoat followed by one or two coats of Dulux Professional Liquid Gloss is recommended. Additional coats may be needed for significant colour changes.

You should wait a minimum of 16 hours and a maximum of 24 hours between coats. The paint is touch dry in 4-6 hours.

Yes, it is suitable for exterior metal surfaces and provides durable protection.

The paint covers up to 16 square meters per litre.

Unwanted paint can often be taken to a Community RePaint collection point. Visit www.communityrepaint.org.uk for more information.

Solvent-based paints, including this gloss, may discolour over time, especially in areas with low natural light. For long-lasting whiteness in such conditions, a water-based formulation from the Dulux Quick Dry range is recommended.

For best results, clean brushes and rollers with Polycell Brush Cleaner.

Ensure the surface was properly prepared and is free from grease. Apply an additional coat of Dulux Professional Undercoat or Liquid Gloss if necessary. Check that you are applying the paint evenly and not too thinly.

Ensure the paint is applied in a well-ventilated area within the recommended temperature range. Thick coats or high humidity can prolong drying times. Avoid closing doors or windows until fully dry.

This can sometimes occur with solvent-based paints. Ensure consistent application and adequate drying between coats. For long-lasting whiteness, consider water-based alternatives for future projects.

Ensure the paint is stirred thoroughly before use. If the paint is too thick due to cold conditions, a very small amount of the correct solvent may be added as per manufacturer's instructions for solvent-based paints, but this is generally not recommended for best results.