Soho Lighting 3 Gang Dimmer and Rocker Switch Combo - White

This Soho Lighting White Metal Flat Plate Screwless 3 Gang 2 x Intelligent Dimmer 150W LED (300w H...

Best current price£95.00from Elesi.com

One Offer

1 offer from £95.00

View price history by clicking the chart icon.

Elesi.comSoho Lighting White Metal 3 Gang Dimmer And Rocker Switch Combo (2 X 2-Way Intelligent Dimmer & 1 X 2-Way Switch) - Size: H 86Mm X W 146Mm X D 4.5Mm,
Free delivery in 1–3 days
£95.00
Visit shop

Product Information

Full details

This Soho Lighting White Metal Flat Plate Screwless 3 Gang Dimmer and Rocker Switch Combo is designed for homeowners seeking a modern and versatile lighting control solution. Its key benefit is the seamless integration of two dimmers with intelligent LED compatibility and a standard light switch on a single, stylish screwless plate, offering flexibility in controlling different lighting types. A minor caveat is that the dimmer caps are made of plastic.

All features

ColourWhite
Model Part Number5056361218740
BrandSoho Lighting

Extended Product Information

FAQs

What is soft-start technology?

Soft-start technology gradually increases the light level over 1-2 seconds when turned on, which helps to prolong the lifespan of light bulbs by reducing initial electrical stress.

Can I use any LED bulb with this dimmer?

No, you must use bulbs specifically labelled as 'dimmable LED'. Non-dimmable LED bulbs will not work correctly and may cause damage. The total load for dimmable LEDs should not exceed 150W.

How do I switch between leading edge and trailing edge mode?

The Soho Lighting dimmer features a simple button setup. Press and hold the setup button on the Enkin module until the LED indicator changes color or flashes, indicating the mode has been switched. Refer to the Enkin module's specific instructions for detailed steps.

What is the maximum wattage for Halogen/Incandescent bulbs?

The dimmer supports a maximum total load of 300W for dimmable Halogen or Incandescent bulbs.

Do I need special wiring for 2-way switching?

For 2-way switching, you will need to connect a standard light switch to this dimmer using appropriate wiring for multi-location control. The additional switches are sold separately.

Are the dimmer modules silent?

Yes, the Enkin modules used in this dimmer are designed to operate silently and without flickering, providing a comfortable lighting environment.

What are the dimensions of the switch plate?

The dimensions are approximately Height 86mm x Width 146mm x Depth 4.5mm.

Troubleshooting

Dimmer not working or flickering

Ensure the bulb is dimmable and compatible with the dimmer's load capacity. Check the leading/trailing edge setting on the dimmer and switch to the appropriate mode for your bulbs. Verify bulb wattage is within the 150W LED or 300W Halogen/Incandescent limit.

Switch is unresponsive

Confirm that the circuit breaker is on and that power is supplied to the switch. Check all wiring connections for security and correctness.

2-way switching is not functioning

Ensure a compatible standard switch is wired correctly as per 2-way switching diagrams. Verify that the dimmer is also configured for 2-way operation if required by the specific setup.

Overheating or unusual noise

Immediately turn off power at the mains. Check the total load connected to the dimmer; it may exceed the maximum rating. Ensure adequate ventilation around the switch.

Pros and Cons

Pros

  • Modern, screwless aesthetic enhances interior design.
  • Versatile control with two dimmers and one rocker switch.
  • Intelligent dimming protects and extends the life of light bulbs.
  • Compatibility with a wide range of dimmable LED and traditional bulbs.
  • Flexible installation with adjustable dimming modes and 2-way switching capability.

Cons

  • Dimmer caps are made of plastic, which may be perceived as less premium than metal.
  • Requires separate purchase of standard switches for multi-location control.
  • Installation requires basic electrical knowledge; professional installation is recommended.

Setup, Compatibility & Care

Setup: The unit uses a grid switch system, allowing for flexible arrangement of modules. Ensure the power is turned off at the mains before installation. The Enkin PDM150 dimmer module requires a simple push-button setup for mode selection (leading/trailing edge) and pairing for 2-way functionality. Refer to the Enkin module's specific instructions for detailed setup procedures.

Compatibility: This dimmer is compatible with dimmable LED bulbs (max 150W total load) and dimmable Halogen/Incandescent bulbs (max 300W total load). It can be configured for both leading edge and trailing edge modes to suit different bulb types. For 2-way switching, standard light switches (not included) are required.

Care: Clean the screwless flat plate with a soft, dry or slightly damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the finish. Ensure the switch is dry before restoring power.

Similar items

Price History

DatePrice
Visit shop