Soho Lighting 4 Gang Switch - White

An intermediate switch is used in conjunction with two 2-way switches to control a light from three or more locations. It sits between the two 2-way switches in the wiring loop.

Yes, due to the nature of electrical wiring and safety regulations, it is strongly recommended to have this switch installed by a qualified electrician.

This product is designed for standard on/off switching. It is not compatible with dimmer modules unless specifically stated or if dimmer modules are available separately within the same grid system and are compatible.

The switch plate dimensions are Height 86mm x Width 146mm.

No, the switch modules are provided separately and need to be assembled onto the grid plate by the installer according to the desired configuration.

This switch is designed for standard UK household wiring configurations for lighting circuits, including 2-way and intermediate switching.

Verify that the power supply to the circuit is on. Double-check all wiring connections against the correct wiring diagram for 2-way and intermediate switches. Ensure the correct switch module is in the intended position.

Check for loose wire connections at the switch and the light fixture. Ensure the bulbs are compatible and correctly seated. If the issue persists, there may be a problem with the circuit itself, requiring an electrician.

Ensure you are using the correct Soho Lighting modular components and grid plate. Verify that no obstructions are present on the modules or plate interfaces.