Soho Lighting 4 Gang Dimmer and Rocker Switch Combo - White

The intelligent dimmers are compatible with dimmable LED bulbs up to 150W. For other bulb types like incandescent or halogen, consult the product manual for specific wattage limits and compatibility. Standard rocker switches are compatible with most common lighting types.

2-way switching allows you to control a light or group of lights from two different locations using two separate switches. This is common for staircases or hallways with entrances at both ends.

The soft-start technology is an automatic feature of the intelligent dimmer. It engages each time the light is switched on, providing a gradual increase in brightness. No manual setup is required for this feature.

The intelligent dimmer itself is designed for 2-way (two-location) control. For control from three or more locations, intermediate switches would be required in conjunction with 2-way switches, which may not be supported by this specific dimmer model. Consult a qualified electrician for complex multi-way switching needs.

The mode can be switched using the push-button setup. Typically, this involves holding down a specific button or combination of buttons for a set duration. Refer to the product's installation manual for the exact procedure for this model.

Please refer to the product packaging or the manufacturer's website for specific warranty information, as warranty periods can vary.

The product is a 'Flat Plate' switch with a white metal finish. The plate is integrated into the switch unit design, contributing to its screwless aesthetic.

Check if the bulb type is compatible and within the wattage limit. Try switching the dimmer mode (trailing/leading edge) via the push-button setup. Ensure all connections are secure.

Verify that the circuit breaker is on and that power is supplied to the switch. Check all wire connections to ensure they are correctly and firmly attached.

Confirm that you are using dimmable bulbs. Ensure the dimmer has been correctly set up and that the correct mode (trailing/leading edge) is selected for your bulb type.

Some warmth is normal, especially under high load. If the unit becomes excessively hot, turn off the power and check for overloading or loose connections. The self-recovering thermal fuse should automatically reset if overheating occurs.