Dulux Weathershield Masonry Paint - Pale Slate - 10L

For optimal durability and coverage, we recommend applying two coats. On bare or porous surfaces, a diluted first coat or a suitable primer may be necessary before applying two full coats.

Touch dry in 2-4 hours, and recoatable in 4-6 hours under normal conditions (temperatures above 10°C and low humidity). Allow longer drying times in cooler or more humid conditions.

No, Dulux Weathershield Masonry Paint is specifically formulated for exterior use and is not recommended for interior surfaces.

It is suitable for most exterior masonry surfaces including render, concrete, roughcast, pebbledash, and sound brickwork. It is not suitable for common fletton brick.

Clean all tools with clean water immediately after use. Remove as much paint as possible from brushes and rollers before rinsing.

Dulux Weathershield is formulated for long-lasting protection and durability, typically offering years of protection. Its Stay Clean Technology helps maintain its appearance over time.

This often indicates poor surface preparation. Ensure the surface is clean, dry, and free from loose material before painting. Scrape off all loose paint, clean the surface, and consider using a stabilising primer.

Ensure the paint is thoroughly stirred before and during use. Apply a minimum of two coats, allowing adequate drying time between applications. For very porous surfaces, a diluted first coat or primer may be needed.

If mould reappears, the underlying cause (e.g., dampness) might not have been fully addressed. Treat the surface with a fungicidal wash *before* painting, and ensure the surface is completely dry. This paint prevents new mould growth *within* the film, but won't solve severe existing damp issues.

Drying times are affected by temperature and humidity. Ensure application is done in dry conditions with temperatures above 10°C and not in direct strong sunlight or frost. Good ventilation helps if applicable.