Dulux Weathershield Masonry Paint - White - 10L

This paint is designed for exterior masonry surfaces including brick, concrete, pebble-dash, and render.

No, this paint is formulated to be applied directly onto prepared masonry surfaces without the need for a separate primer.

For optimal colour depth, durability, and full protective benefits, we recommend applying two coats.

You can typically recoat after 4 hours, depending on temperature and humidity.

A 10L can covers approximately 150 m² (15 m² per litre), depending on the porosity and texture of the surface.

Yes, it is a water-based paint with minimal VOCs (Volatile Organic Compounds), making it a safer choice for you and the environment.

The 15-year guarantee covers protection against dirt, mould, algae, UV, and water, ensuring the paint performs as expected for an extended period. Please note, registration is required, and terms and conditions apply.

Ensure the surface was thoroughly clean and dry before painting. Apply the paint evenly, avoiding overloading your brush or roller. Always apply a minimum of two coats, allowing adequate drying time (4 hours) between each, for full colour depth and uniform finish.

Check weather conditions; high humidity or low temperatures can significantly extend drying times. Ensure good air circulation around the painted area. Also, avoid applying excessively thick coats, as this can hinder drying.

This often indicates poor surface preparation. Ensure all loose material, old flaking paint, dirt, and mould were completely removed before applying the new paint. The surface must be sound, clean, and dry for proper adhesion. Scrape off affected areas, re-prepare the surface, and re-apply.