Dulux Heritage Velvet Matt Emulsion Paint 2.5L - Green

Generally, two coats are recommended for optimal depth of colour and a consistent, even finish. However, this can vary depending on the original surface colour and condition, with darker surfaces potentially needing an additional coat.

While Dulux Heritage Velvet Matt is a washable emulsion, for high-humidity areas like bathrooms or kitchens that experience significant condensation, a paint specifically formulated for these environments (e.g., a Durable Bathroom or Kitchen paint) might offer better long-term protection against mould and moisture.

For the best results with a matt emulsion, use a good quality synthetic brush for precise cutting-in around edges and corners. For larger wall areas, a medium-pile roller (such as a microfibre or woven roller) is recommended to achieve a smooth, even, and consistent finish.

Dulux Heritage Velvet Matt paint is typically touch dry in 2-4 hours and ready for a second coat after 4-6 hours. For the paint to fully cure and achieve its maximum durability, allow a full 24 hours before subjecting it to light use or gentle wiping.

'Waxed Khaki' is described as a distinctive deep grey/green that combines the beauty and versatility of a cool neutral with calming qualities. It leans towards a cooler tone, making it highly versatile and adaptable to various lighting conditions.

> Info needed: [coverage rate per litre]

While technically possible if the wallpaper is firmly adhered, clean, and in excellent condition, it is generally recommended to remove wallpaper for the best and longest-lasting paint finish. If painting over wallpaper, ensure all seams are flat and well-sealed to prevent bubbling or peeling.

It is highly recommended to purchase a tester pot of 'Waxed Khaki' and paint a small section of your wall, or a large piece of card. Observe this sample in different lighting conditions throughout the day to see how the colour reacts before committing to painting the entire room.

Ensure the surface was thoroughly prepared, clean, and primed according to instructions. Apply an adequate number of coats (typically two) with even brush or roller strokes, allowing sufficient drying time between each coat. Avoid spreading the paint too thinly.

Dark or strong existing colours may require an additional coat for full opacity. For best results, consider applying a grey-toned primer before painting with Waxed Khaki; this helps block out the previous colour more effectively and promotes true colour rendition.

Ensure you are using high-quality painting tools (synthetic brush for cutting-in, medium-pile roller for walls). Apply paint in even sections, maintaining a 'wet edge' to avoid overlapping dry paint. Avoid excessive pressure on the roller, which can push paint to the edges and create lines.