Dulux Heritage Velvet Matt Emulsion Paint - Ravens Flight

Generally, two coats are recommended for optimal colour depth and finish. However, if painting over a very strong or contrasting colour, or for the deepest Ravens Flight black, a third coat or a tinted primer might be beneficial.

Info needed: Please refer to the specific product label or datasheet for precise drying times. Typically, emulsion paints are touch dry in 2-4 hours and can be recoated after 4-6 hours, but this can vary with temperature and humidity.

While this paint is washable, for areas with high humidity and condensation like bathrooms and kitchens, paints specifically formulated with enhanced mould and mildew resistance are usually recommended. Info needed: Check product-specific guidance for moisture resistance.

For the smoothest velvet matt finish, use a good quality synthetic brush for cutting in edges and a medium pile (around 9-12mm) roller for larger wall and ceiling areas.

To clean, gently wipe with a soft, damp cloth. For tougher marks, a small amount of mild, non-abrasive detergent can be used. Avoid excessive rubbing or harsh cleaning agents, as these can affect the matt finish.

A primer is highly recommended for new plaster, very absorbent surfaces, or when making a significant colour change (e.g., from a bright colour to Ravens Flight black). It helps achieve even coverage, better adhesion, and a more uniform final finish.

Ensure the surface was properly prepared (clean, smooth, primed if needed). Apply paint in thin, even coats, allowing sufficient drying time between each. Avoid over-brushing or over-rolling, and maintain a wet edge.

A dark colour like Ravens Flight benefits from good surface preparation. If painting over a very light or contrasting colour, consider using a grey-tinted primer or an additional coat. Ensure each coat is allowed to dry fully before applying the next.

This usually indicates poor surface adhesion. The surface may not have been clean, dry, or properly prepared. Remove all loose paint, sand the area, clean thoroughly, and apply a suitable primer before repainting.

Apply paint evenly, ensuring the roller is not overloaded or too dry. Work in manageable sections to keep a wet edge. Use a high-quality roller with a suitable nap for a smooth finish. Avoid painting in direct sunlight or strong drafts, which can cause paint to dry too quickly.