Dulux Heritage Velvet Matt Emulsion Paint 2.5L - Raw Cashmere

Coverage can vary, but generally, 2.5 litres will cover approximately 25-30 square meters with one coat. It's recommended to apply two coats for best results. Measure your walls and ceilings, subtract non-paintable areas, and use the coverage rate on the can as a guide.

For most previously painted, sound surfaces, a primer isn't strictly necessary. However, if painting bare plaster, new drywall, or surfaces with significant colour changes, a suitable primer or mist coat is highly recommended to ensure even absorption and a consistent finish.

Dulux Heritage Velvet Matt Emulsion is typically touch dry in 1-2 hours and can be recoated after 2-4 hours. Always refer to the specific instructions on the paint can for exact drying times, as they can vary with humidity and temperature.

While washable, this paint is a standard emulsion. For high-humidity areas like bathrooms and kitchens, paints specifically designed with enhanced moisture and mould resistance are usually recommended. This paint is best suited for living areas, bedrooms, and hallways.

Clean all equipment immediately after use with warm soapy water. Rinse thoroughly until water runs clear, then reshape brushes and allow them to dry naturally.

The 'velvet matt' finish refers to its exceptionally smooth, low-sheen appearance that feels soft to the touch. It provides a luxurious depth of colour and helps to disguise minor surface imperfections more effectively than higher-sheen paints.

Ensure adequate surface preparation, including priming porous surfaces. Apply paint evenly, maintaining a wet edge, and allow sufficient drying time between coats. Two coats are usually necessary for a consistent finish.

This often indicates poor surface adhesion. Ensure the surface was clean, dry, and free of loose material before painting. Proper priming for bare or difficult surfaces is essential for adhesion.

Lighting conditions significantly affect how a colour appears. Check the colour in various natural and artificial lights. Also, ensure paint was thoroughly stirred to mix pigments evenly.

Use high-quality brushes and rollers suitable for emulsion paint. Apply paint smoothly without excessive pressure, and avoid overworking areas. Maintain a wet edge and apply in consistent sections.

Allow the paint to fully cure for several days (typically 7-14 days) before attempting any cleaning. Use a soft, damp cloth with very gentle pressure; avoid harsh chemicals or abrasive sponges.