Hammerite Radiator Paint - Satin - White - 500ml

No, this product is specifically formulated for water-filled radiators and pipes.

For best results, apply 2 coats, waiting 16 hours between each application.

As long as the surface is clean, dry, and free from rust and loose paint, no separate primer is typically required.

Yes, but ensure the room is well-ventilated for at least 12 hours after the radiator is turned back on to clear away odours.

No, this paint is intended for indoor use only.

Wash the affected area immediately with plenty of soap and water. If irritation persists, seek medical advice.

The radiator was likely too warm during application. Ensure the radiator is completely cold before painting and respect the 12-hour 'off' period after the final coat.

Ensure you are using a high-quality brush and avoid over-working the paint. Apply in thin, even layers.

High humidity or low room temperatures can slow drying times. Provide better ventilation in the room and wait a few more hours before turning on the heating.