Dulux Stain Block Primer & Undercoat - White

Typically, one coat is sufficient for stain blocking. However, two coats may be necessary for particularly stubborn stains.

No, this primer is designed for interior use only.

You can use most water-based or oil-based topcoat paints. Dulux paints are recommended for best results.

Drying times vary. Refer to the product label for specific details, but generally, it takes 2-4 hours to dry before recoating.

It is always a good idea to lightly sand any glossy surfaces before applying the primer to ensure proper adhesion. Otherwise, ensure the surface is clean and dry.

It is not recommended to apply directly over wallpaper. Remove the wallpaper and prepare the underlying surface before applying the primer.

Clean up spills immediately with warm, soapy water while the primer is still wet.

Ensure that the stain block primer was applied correctly and allowed to dry completely. Reapply the primer to the affected area and allow to dry fully before applying another coat of paint.

Ensure the surface was properly cleaned and prepared before application. Lightly sand glossy surfaces before priming to improve adhesion.

This could be due to applying too thick a coat or to a surface not properly prepared. Ensure the primer coat is thin, even, and that the surface is properly prepared by cleaning, drying and removing any loose particles.