Hammerite Rust Beater - Grey - 750Ml

This Hammerite Rust Beater grey primer provides anti-corrosive protection for metal surfaces. It n...

Best current price£21.00from B&Q

Colour

One Offer

1 offer from £21.00

View price history by clicking the chart icon.

B&QB&Q - Rust Beater Grey Iron Primer750Ml
Free delivery in 1–3 days
£21.00
Visit shop

Product Information

Full details

This guide is for anyone looking to protect metal surfaces from rust and prepare them for painting. Hammerite Rust Beater Grey Primer offers anti-corrosive protection, neutralizes existing rust, and creates a smooth base for painting, extending the life of your metal structures. Note that proper surface preparation is crucial for optimal results.

All features

ColourGrey
Model Part Number5296862
BrandHammerite

Extended Product Information

FAQs

How much surface area will one can cover?

One 0.75L can of Hammerite Rust Beater Grey Primer typically covers approximately 12 m²/L.

What is the drying time?

Drying time is approximately 2 hours between coats.

Can I use this primer on non-ferrous metals?

No, this primer is specifically designed for use on ferrous metals (iron and steel).

Do I need to sand the surface before applying the primer?

Yes, it is recommended to remove loose rust and abrade the surface with emery paper to provide a key.

How should I clean my tools after use?

Clean brushes and rollers with Hammerite Brush Cleaner & Thinners or white spirit immediately after use.

How many coats of primer should I apply?

It is recommended to apply two coats for optimal protection. Allow 6 hours between coats.

What topcoats can I use with this primer?

Hammerite Rust Beater Grey Primer is compatible with most topcoats. Always check the topcoat manufacturer's instructions to ensure compatibility.

Is this primer suitable for outdoor use?

Yes, this primer is suitable for both indoor and outdoor use.

Troubleshooting

Primer is not adhering properly.

Ensure the surface is properly prepared, clean, and free of loose rust. Lightly abrade the surface before application.

Primer is peeling or flaking.

Ensure the surface is fully dry before applying the next coat. Check compatibility with the topcoat.

Rust is still visible after application.

Remove any remaining loose rust and apply a second coat of the primer. Heavily rusted areas may require more than two coats.

Application is too thick and runs.

Apply in thin, even coats. Avoid applying too much product at once.

Pros and Cons

Pros

  • Effective rust neutralization.
  • Provides a smooth base for topcoats.
  • Easy to apply by brush or roller.
  • Extends the life of metal surfaces.
  • Suitable for indoor and outdoor use.
  • Compatible with most topcoats.

Cons

  • Requires proper surface preparation.
  • Solvent-based, so adequate ventilation is needed.
  • Drying time of 2 hours between coats.
  • Must be used with a suitable topcoat.
  • Contains VOCs (Volatile Organic Compounds).
  • May require multiple coats for heavily rusted areas.

Setup, Compatibility & Care

Setup

  1. Surface Preparation: Remove loose rust, scale, and old paint using a wire brush or coarse abrasive paper. Abrade clean steel with emery paper.
  2. Degreasing: If necessary, degrease the surface with white spirit, then rinse with clean water and allow it to dry.
  3. Stir Thoroughly: Stir the primer thoroughly before use.

Compatibility

  • Suitable Materials: Ferrous metals (iron and steel).
  • Topcoats: Compatible with most topcoats. Ensure the topcoat is compatible with solvent-based primers.
  • Not suitable for: Non-ferrous metals.

Care

  • Application: Apply by brush or roller. Ensure edges and corners are well covered.
  • Drying: Allow 2 hours drying time between coats. Apply topcoat after a minimum of 6 hours, or ideally after 24 hours.
  • Cleaning: Clean brushes with Hammerite Brush Cleaner & Thinners or white spirit.

Similar items

Price History

DatePrice
Visit shop