Lick Supreme Flat Matt Multi-Surface Emulsion Paint - Green 02 - 2.5L

For optimal results and full coverage, apply two coats of Lick Supreme.

This paint is suitable for most interior surfaces, including walls, ceilings, and woodwork.

Use a damp cloth or sponge with a mild detergent to clean the painted surfaces. Avoid using abrasive cleaners.

Allow at least 2-4 hours for the paint to dry between coats. Refer to the paint can for specific drying times.

Priming may be necessary depending on the surface. For previously painted surfaces, ensure they are clean and in good condition.

Store the paint in an airtight container in a cool, dry place. Ensure the lid is sealed tightly to prevent drying.

Lick Supreme has a Class 1 Scrub Rating, indicating it is highly resistant to wear and tear and can be easily cleaned.

The paint has an Ultra Flat Matt finish.

Ensure the paint is thoroughly mixed. Apply an even coat and avoid over-brushing or rolling. Apply a second coat after the first has dried.

Ensure the surface is properly prepared and primed if necessary. Lightly sand glossy surfaces. Allow adequate drying time before applying subsequent coats.

The final color can be affected by the lighting. Test the color in different lighting conditions before painting the entire area.