Hammerite Rust Beater - Red Iron Primer - 750Ml
Not Available
Hammerite Rust Beater Red Iron Primer, 750Ml.
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone looking to protect and rejuvenate metal surfaces with the Hammerite Rust Beater Red Iron Primer. This primer provides a durable base for topcoats, effectively stopping rust and preventing its return. A key benefit is its direct-to-rust application, saving prep time. However, proper surface preparation is still crucial for optimal results.
All features
| Colour | Red |
|---|---|
| Model Part Number | 5296861 |
| Brand | Hammerite |
Extended Product Information
FAQs
How much surface area does a 750ml tin cover?
A 750ml tin covers approximately 12 m² per liter.
What is the drying time?
Drying time is 2 hours, and recoat after 6 hours.
Can I use this primer on all types of metal?
Yes, it is suitable for ferrous metals.
Do I need to sand before applying the primer?
Yes, abrade clean steel with emery paper to provide a key for the primer.
What should I use to clean my brushes?
Use Hammerite Brush Cleaner & Thinners or white spirit to clean your brushes.
Is this primer suitable for outdoor use?
Yes, it is suitable for both indoor and outdoor use.
What topcoats can I use with this primer?
This primer is compatible with most topcoats. Always check the topcoat manufacturer's instructions for compatibility with metal primers.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared, degreased, and abraded. Apply a second coat of the primer.
Rust is reappearing after application.
Make sure all loose rust has been removed before applying the primer. Consider applying a topcoat to seal the primer.
Brush strokes visible after application.
Apply thinner coats and ensure the paint is evenly distributed. You can also try using a roller for a smoother finish. Thin the paint with Hammerite Brush Cleaner & Thinners if required.
Pros and Cons
Pros
- Easy direct-to-rust application saves time and effort.
- Provides a strong base for topcoats, extending the life of your metal items.
- Effective at stopping and preventing rust.
- Suitable for use on a variety of metal surfaces, including furniture.
Cons
- Requires proper surface preparation for optimal performance.
- Solvent-based, requiring adequate ventilation during application.
- Drying time of 2 hours between coats.
- May require multiple coats for heavily rusted areas.
Setup, Compatibility & Care
- Surface Preparation:
- Remove loose rust, scale, and old paint using a wire brush or coarse abrasive paper.
- Abrade clean steel with emery paper to create a key for the primer to adhere to.
- Degrease the surface with white spirit if necessary, and rinse with clean water, allowing it to dry completely.
- Application:
- Ideal application temperature is between 8 to 25°C.
- Stir the paint thoroughly before use.
- Apply two coats, allowing 6 hours between coats if using a brush. Ensure corners and edges are well covered.
- If using a roller, apply two thick coats.
- Thin with Hammerite Brush Cleaner & Thinners at a ratio of 9 parts paint to 1 part thinner when using a roller.
- Apply a suitable Hammerite topcoat after a minimum of 6 hours.
- Tool Cleaning:
- Clean brushes with Hammerite Brush Cleaner & Thinners or white spirit immediately after use.
- Compatibility:
- Compatible with most topcoats. Ensure the topcoat is suitable for metal.
- Safety:
- Wear appropriate personal protective equipment, including gloves and eye protection.
- Ensure adequate ventilation during application.