Setup, Compatibility & Care
Surface Preparation
Achieving the stated 15 years of protection requires thorough surface preparation. All masonry surfaces must be clean, dry, and free from loose or flaking material. Remove any dirt, dust, or grease. Treat existing mould or algae with a fungicidal wash, then rinse thoroughly and allow to dry. Fill any large cracks or defects with appropriate exterior filler. Ensure surfaces are sound before painting.
Application
Apply two coats for optimal performance and durability. Use a good quality masonry brush or roller. Allow sufficient drying time between coats (refer to product label for specific times, typically 2-4 hours). Avoid painting in direct sunlight or when rain is imminent (though it's rainproof in 30 mins, initial drying in stable conditions is best).
Compatibility
This paint is specifically designed for exterior masonry surfaces, including render, roughcast, pebbledash, brickwork, and concrete. It is not suitable for previously painted glossy surfaces without proper sanding and priming.
Care & Maintenance
Once applied and fully cured, the paint film is designed for minimal maintenance. For general cleaning, gently wash surfaces with a mild detergent and water, rinsing thoroughly. Avoid abrasive cleaners or high-pressure washers, which could damage the paint film. The integrated algicide and fungicide will help keep the surface free from biological growth.