Johnstone's Kitchen Paint - Matt - Urban Sky

Typically, two coats are recommended for optimal coverage, durability, and colour depth. However, this can vary based on the original surface colour and condition.

Touch dry time is usually 1-2 hours, and recoat time is generally 2-4 hours. Always refer to the specific drying instructions on the paint can for precise timings, as environmental conditions can affect drying.

While this paint offers excellent moisture resistance for kitchens, bathrooms often experience higher and more prolonged humidity. For optimal performance in bathrooms, a paint specifically formulated for bathroom environments is usually recommended.

Info needed: [Coverage per litre is not provided in the product description. This information is typically found on the product label and can vary. Assume approximately 10-12 square meters per litre, but always check the can.]

A primer is highly recommended for bare or porous surfaces, if painting over a significantly darker colour, or if the surface has been heavily stained by grease. For previously painted surfaces in good condition, a primer might not be essential, but proper cleaning and light sanding are still advised.

Simply use a soft, damp cloth with a mild household detergent. Gently wipe the affected area. Avoid using abrasive cleaners or scrubbing brushes, as these can damage the matt finish.

A matt finish is non-reflective and provides a smooth, subtle appearance. It's excellent for hiding minor wall imperfections and offers a contemporary look. However, it can sometimes be more prone to showing scuff marks than higher sheen finishes.

Ensure the surface was thoroughly cleaned, dry, and free of grease before painting. If the surface was glossy, it might not have been adequately sanded. Reprime and repaint after proper preparation.

Apply the paint in thin, even coats using a good quality brush or roller. Ensure sufficient drying time between coats. Avoid overspreading the paint or applying it too thickly.

For very stubborn or ingrained grease, a specialized degreasing cleaner should be used before painting. If reappearing, the underlying grease might not have been fully removed or sealed. Consider a stain-blocking primer before repainting.