MAXICOLOR Spray Gloss Anthracite Grey - RAL7016 - 400ml

MAXICOLOR Gloss Anthracite Grey Spray Paint is suitable for wood, metal, and plastic surfaces.

Drying times vary depending on environmental conditions, but it typically dries to the touch within a few minutes and is fully dry within a few hours. Refer to the can for specific instructions.

The coverage depends on the surface and application method. However, a 400ml can generally provides ample coverage for smaller projects. It is best to apply multiple thin coats for better results.

While not always necessary, priming can improve adhesion and the final finish, especially on certain materials like metal. Always check compatibility of the primer with the paint.

Yes, MAXICOLOR Gloss Anthracite Grey Spray Paint is suitable for both indoor and outdoor use.

Store the spray paint in a cool, dry place away from direct sunlight and extreme temperatures.

Turn the can upside down and spray until only propellant comes out to clear the nozzle. If the nozzle remains clogged, try cleaning it with a pin. Otherwise, replace it with a new one.

Apply thinner coats and ensure the can is held the correct distance from the surface. Reduce the amount of paint applied in each pass.

Ensure proper surface preparation (sanding and cleaning). Apply even coats and maintain the correct distance from the surface.

Make sure the surface is clean, dry, and free of any contaminants. Consider using a primer suitable for the material before applying the paint.

Clean the nozzle after each use. If clogged, try using a pin to clear the nozzle. If the nozzle is still clogged, replace it with a new one.