Maxicolor Spray Paint - Gloss - Sky Blue - RAL5015 - 400ml

This paint is suitable for treated and untreated wood, metal, aluminium, glass, stone, and most plastics. Always prepare the surface properly.

Drying times vary based on temperature, humidity, and coat thickness. Typically, it is touch-dry in 10-15 minutes and can be recoated after 1-2 hours. Full cure may take 24 hours or more.

A primer is recommended for optimal adhesion, especially on bare metal, plastics, or previously painted surfaces needing a uniform base. It helps ensure a smoother finish and better durability.

Yes, the MaxiColor spray paint is designed for both indoor and outdoor use, offering weather resistance.

Turn the can upside down and spray for a few seconds to clear the nozzle. If still blocked, carefully remove the nozzle and soak it in a suitable solvent (like paint thinner), then rinse and dry before reattaching.

Apply in thin, even coats from the recommended distance (25-30 cm). Move the can in a steady, sweeping motion, overlapping each stroke slightly. Avoid applying too heavily in one go, which can lead to drips.

Yes, MaxiColor spray paints are available in a wide range of colours based on the RAL colour standard.

Shake the can more vigorously. Ensure the nozzle is not blocked. If blocked, remove and clean according to instructions, or replace the nozzle.

Apply paint in thinner coats. Hold the can closer to the surface if spraying too far away, or further if too close. Ensure the can is held upright during application.

The surface may not have been properly prepared. Ensure it was clean, dry, and free from contaminants. A primer might be necessary for certain materials.

Apply additional thin coats rather than one heavy coat. Ensure the paint has been shaken sufficiently before and during use.

This can occur in high humidity or low temperatures. Ensure application conditions are within the recommended range (15-25°C) and allow more time for curing in adverse conditions.