MAXICOLOR Spray Gloss White RAL9010 400ml - White

MAXICOLOR is fast-drying. A recoat can typically be applied after 10-15 minutes, but full curing can take 24 hours or more, depending on conditions.

Yes, MAXICOLOR is suitable for both indoor and outdoor use, offering protection and a decorative finish.

It is designed for use on wood, metal, and plastic. For best results on plastic, consider using a specialized plastic primer first.

Shake the can well, maintain a consistent distance of 25-30 cm, and apply thin, even coats. The product's vertical stability helps minimize drips, but proper technique is key.

Invert the can and spray for a few seconds to clear the nozzle. If blocked, remove the nozzle and clean it with a suitable solvent.

RAL9010 is a standard color code from the RAL color system, specifying a particular shade of pure white.

Coverage is excellent, but applying two thin coats is generally recommended for a durable and uniform finish. Assess coverage after the first coat.

Ensure the can has been shaken sufficiently. Check if the nozzle is clogged. If clogged, follow the cleaning instructions in the 'Care' section.

Ensure the can is held at the correct distance (25-30 cm) and moved in a steady, sweeping motion. Apply thin, even coats rather than one thick coat. Vertical stability is good, but holding the can too close or spraying too heavily can still cause runs.

Ensure the surface is clean, dry, and free from grease, dust, or rust. Lightly sand the surface before application. Use a suitable primer if painting on difficult surfaces like certain plastics or heavily weathered materials.

Shake the can more frequently during use. Ensure the nozzle is clean and free from dried paint. Try clearing the nozzle as per the 'Care' instructions.