Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and preven...Hammerite No.1 Rust Beater provides a high build finish to heavily pitted areas of rust and prevents new rust from forming. This easy to use rust beater not only kills rust but also primes and undercoats all in one. It can be used on fire surrounds, metal railings, metal gates and garage doors to name a few. This product is corrosion resistant and compatible with most topcoats. Dimensions: 7.00cm x 7.00cm x 7.00cm. Weight: 0.39kg.
Best current price£7.56from Blueperry agriculture (UK)
This guide is for anyone looking to remove rust and protect metal surfaces using Hammerite No.1 Rust Beater. It's designed to kill rust, prime, and undercoat in one application, providing a high-build finish. Keep in mind that proper surface preparation is key for optimal results.
All features
Colour
Beige
Model Part Number
5092815
Brand
Hammerite
Extended Product Information
FAQs
How long does it take for Hammerite No.1 Rust Beater to dry?
Allow 2 hours between coats.
Do I need to apply a topcoat?
Yes, a suitable Hammerite topcoat should be applied after a minimum of 6 hours.
Can I use Hammerite No.1 Rust Beater on plastic?
No, it is designed for metal surfaces only.
How should I clean my brushes after use?
Use Hammerite Brush Cleaner & Thinners or white spirit.
What is the coverage of the paint?
Approximately 12 m²/L
Is this product suitable for outdoor use?
Yes, it is suitable for both indoor and outdoor use.
How many coats should I apply?
Apply two coats of Hammerite No.1 Rust Beater.
Troubleshooting
Paint not adhering to the surface.
Ensure the surface is properly prepared, degreased, and free of loose rust. Lightly sand the surface before application.
Rust reappearing after application.
Ensure all rust is removed before application. Apply a topcoat for additional protection. Use two coats of Hammerite No.1 Rust Beater.
Brush marks visible after application.
Apply the paint evenly. Thin with Hammerite Brush Cleaner & Thinners if necessary. Use a roller for a smoother finish.
Pros and Cons
Pros
One-step application, saving time.
Provides a protective and high-build finish.
Suitable for both indoor and outdoor use.
Easy to apply with a brush or roller.
Can be applied directly to rust
Cons
Requires proper surface preparation for best results.
Drying time of 2 hours between coats.
Requires a topcoat for complete protection.
Solvent based product, requiring adequate ventilation
May require multiple coats for heavily rusted areas.
Setup, Compatibility & Care
Setup
Surface Preparation: Remove loose rust, scale, and old paint by wire brushing or using coarse abrasive paper. Abrade clean steel with emery paper.
Degreasing: Degrease the surface with white spirit if necessary.
Application: Stir the paint thoroughly before use. Apply two coats, allowing 6 hours between coats. For best results, allow 24 hours before applying the topcoat.
Compatibility
Compatible with most topcoats. Ensure the topcoat is suitable for metal surfaces.
Can be used on various metal surfaces, including iron and steel.
Care
Clean tools with Hammerite Brush Cleaner & Thinners or white spirit after use.
Store in a cool, dry place away from heat and open flames.