Crown Trade Fastflow Quick Dry Primer Undercoat - White

Yes, but ensure the metal is properly prepared. Clean, degrease, and prime with a suitable metal primer first.

Usually, one coat is sufficient, but two coats are recommended for porous surfaces or to block stubborn stains.

This primer is ideal for use with Crown Trade Fastflow Quick Dry Gloss and Satin paints. It is compatible with other water-based topcoats as well.

You can expect coverage of up to 15m² per litre, but this may vary depending on the surface porosity and application method.

Yes, it is suitable for both interior and exterior applications, provided the surface is prepared correctly.

Clean all tools and equipment with water immediately after use.

Wash the affected area with soap and water. If irritation persists, seek medical advice.

No, this primer is not designed for direct application to wallpaper. Remove the wallpaper before priming and painting.

Ensure the surface is clean and properly prepared by sanding and removing any loose paint or contaminants. Apply a second coat if necessary.

Use a high-quality brush or roller. Apply the primer evenly and avoid over-brushing or over-rolling. Maintain a wet edge during application.

Apply a second coat of the primer undercoat, or spot-prime areas with heavy staining before the overall coat.

Ensure adequate ventilation and check the room temperature and humidity levels. High humidity and low temperatures can slow the drying process.