Hammerite No1 Rust Beater - Dark Brown - 250ml

Apply two coats for optimal protection and rust prevention.

Allow 6 hours between coats.

Yes, you can apply a suitable topcoat after a minimum of 6 hours. For best results allow 24 hours.

You can use a brush or a roller. For roller application, thin the paint as needed.

Clean your tools with Hammerite Brush Cleaner & Thinners or white spirit.

Yes, it is suitable for both indoor and outdoor use.

The surface coverage is approximately 12 m²/L.

Remove the product immediately with soap and water. If irritation persists, seek medical advice.

Ensure the surface is thoroughly cleaned, degreased, and abraded before application. Check that there is no loose rust or flaking paint.

Ensure all rust is removed before applying the Hammerite No.1 Rust Beater. Multiple coats may be required on heavily rusted areas.

Thin the paint with Hammerite Brush Cleaner & Thinners, following the recommended ratio (9 parts paint to 1 part thinner).