Setup, Compatibility & Care
Setup
- Surface Preparation: Ensure the surface is clean, dry, and free from any loose or flaking material. Fill any holes or cracks and sand the surface smooth.
- Priming: Use a suitable primer if painting on bare plaster, or if there are stains or previous coatings.
- Application: Stir the paint thoroughly before use. Apply evenly using a brush, roller, or spray. Apply two coats for best results, allowing the first coat to dry completely before applying the second.
Compatibility
This paint is compatible with most interior surfaces including:
- Plaster
- Wallboard
- Previously painted surfaces
Always test in an inconspicuous area to check for compatibility and adhesion.
Care
- Allow the paint to fully cure before cleaning.
- Wipe away marks and stains with a damp cloth or sponge.
- Avoid using abrasive cleaners or scrubbing too vigorously.
- For stubborn stains, use a mild detergent solution.