Setup, Compatibility & Care Instructions
Surface Preparation:
Ensure the surface to be painted is clean, dry, and free from grease or loose coatings. Remove any flaking or peeling old paint. While sanding and priming are usually not necessary, always test on a small, inconspicuous area first.
Application:
Stir the paint thoroughly before use. Apply one or two coats using a good quality brush. Chalk Paint dries quickly, typically within 1-2 hours, depending on environmental conditions. For a smooth finish, apply thin coats. For textured effects, apply thicker coats or use a textured tool.
Compatibility:
Chalk Paint adheres exceptionally well to wood, metal, brick, concrete, plaster, MDF, laminate, old painted surfaces, and fabric. It can also be used on glass and plastic, though a light sanding or priming might improve adhesion on very slick surfaces.
Sealing and Finishing:
To protect the paint and achieve the desired finish, Chalk Paint must be sealed.
- Use Annie Sloan Soft Wax for a matte, traditional finish. Apply with a lint-free cloth or wax brush, working it into the paint. Wipe away any excess with a clean cloth. Allow to dry and then buff to a soft sheen.
- Use Annie Sloan Hard Wax for increased durability, especially on high-traffic items like tabletops or floors.
- Use Annie Sloan Lacquer for a more robust, water-resistant finish, available in matte, satin, or gloss.
Clean-Up:
Clean brushes, rollers, and any spills immediately after use with soap and warm water. Dried paint can be more challenging to remove.