Annie Sloan Chalk Paint - 120Ml - Cream


Currently unavailable


Currently unavailable
This 120 ml sample pot of Annie Sloan Chalk Paint in Cream is ideal for furniture painters and DIY enthusiasts looking to achieve a distressed or smooth decorative finish. Its key benefit is its versatility, adhering to most surfaces with minimal preparation. A caveat is that for maximum durability, a topcoat is recommended.
| Colour | Cream |
|---|---|
| Model Part Number | AS_CHALK_120_mlS |
| Brand | Annie Sloan |
For most surfaces, sanding or priming is not necessary. Chalk Paint adheres exceptionally well. However, for very slick or glossy surfaces, a light de-glossing or priming might improve adhesion.
Drying time is typically 1-2 hours between coats, but this can vary based on humidity and temperature conditions.
Annie Sloan Soft Wax or Chalk Paint Lacquer are the recommended sealants. Wax provides a soft, matte finish and protects the paint, while lacquer offers a more durable, water-resistant finish.
Yes, Chalk Paint can be used on fabric. For upholstery, it's often mixed with a small amount of water and applied thinly. It typically becomes pliable once dry, especially after waxing.
Clean gently with a soft, slightly damp cloth. Avoid harsh detergents or abrasive scrubbers, particularly on waxed finishes.
The coverage is approximately 13 square meters per liter.
Yes, the eco-friendly formula has low VOCs and is considered child-friendly once fully cured and sealed.
Add a small amount of water (a teaspoon at a time) and stir thoroughly. Do not over-thin.
Ensure paint is well-stirred. Apply thinner coats and allow adequate drying time between them. Use a high-quality brush and a smooth, sweeping motion.
Check that the surface is clean, dry, and free from dust or grease. For very smooth or glossy surfaces, consider a light sanding.
This can happen if the paint is applied too thickly or if the humidity is very high. Allow more drying time and ensure a topcoat is applied.
Preparation: Ensure the surface is clean, dry, and free from grease, dust, or loose paint. For very glossy surfaces or those prone to marking, a light sanding or priming might be beneficial, though often not strictly necessary. Test on an inconspicuous area first.
Application: Stir the paint well before use. Apply one or two thin coats using a good quality brush or roller. Allow approximately 1-2 hours between coats, depending on humidity and temperature. Chalk Paint is designed to adhere to most surfaces including wood, metal, glass, and plastic.
Finishing: For durability and a protective sheen, it is highly recommended to seal Chalk Paint with Annie Sloan Soft Wax or Chalk Paint Lacquer. Apply wax with a lint-free cloth or wax brush, and buff to a soft sheen once dry. Lacquer provides a tougher, more water-resistant finish.
Care: Clean painted surfaces gently with a slightly damp cloth. Avoid abrasive cleaners or excessive scrubbing, especially on waxed finishes.
Compatibility: This paint is designed to work seamlessly with Annie Sloan Waxes and Lacquers. It can also be layered with other Chalk Paint colors.